See what our Experts say about this CE Smith Boat Trailer Parts

• Is CE Smith Roller Bunks Capacity for Pair of Roller Bunks
  Hey Gabriel! The CE Smith Roller Bunks # CE27710 have a capacity of 1,500 lbs for the pair. What you can use instead is the Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21741. These actually have a capacity of 3,000 lbs for the pair and are 60" long so they will be perfect for your trailer. You will also need brackets like the # DL21742. If you need anything else feel free to reach out in the comments below.
  view full answer...
• How Would Roller Bunks Install on Karavan Boat Trailer
  Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part # CE27710 installed. For a set of swivel brackets like what you see in the picture that are holding the bunks you'd then want the part # CE10003G-4. I also attached a couple install video links for you to check out as well.
  view full answer...
  
• Recommended Upgrades to CE Smith Boat Trailer Model 48810
  Upgrading the carpeted bunks on your CE Smith Boat Trailer to roller bunks like the CE Smith # CE27710 is a great way to upgrade the trailer. These will allow for much easier loading and launching of your boat and reduce the stress put on your hand winch during operation. These are 5-foot-long bunks that will work perfectly to replace the 5-foot bunk boards on the trailer. You can use the Bunk Brackets # CE10003G-4 to mount them to the trailer. It looks like the trailer is equipped with...
  view full answer...
  
• Roller Bunks and Brackets for 5.2 meter Fiberglass Cabin Boat
  Hey Garry, we have 5 foot long roller bunk sections like the part # CE27710 as well as 4 foot sections like part # CE27700. You'd want to order a quantity of both that would get you to the 5.2 meter length of your hull that matches the best. Then for a set of swivel brackets you'd want the part # CE10003G-4 for a set of 4 and for u-bolts to mount them part # CE15283GA-4 would be a great solution.
  view full answer...
• Can 5' Roller Bunks Be Used in Place of 7' Bunk Boards for a 15' Sail Fish Center Console Boat
  We have had this come up before and the manufacturer stated that the CE Smith Roller Bunks for Boat Trailers # CE27710 would work for a 15' boat in place of your 7' bunk boards as long as the cross members are 56 inches or less. Which your 50" spread is. You can mount them to the existing bunk boards on your trailer or you can use the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4.
  view full answer...
  
• Comparing the Dutton-Lainson and CE Smith Roller Bunks
  I would be happy to compare the Dutton-Lainson Roller Bunks item # DL21741 and CE Smith Roller Bunks item # CE27710 but there's not that much of a difference. Both are 5 foot long and have 6 rollers per section. Each section is rated for 1500 pounds. Both are made with galvanized steel and heavy duty black rubber rollers. The main difference besides price is the shape of the rollers is not exactly the same. The CE Smith rollers are more round where the Dutton-Lainson are boxy and almost...
  view full answer...
• How To Choose the Correct Roller or Carpeted Bunk Boards for a Trailer
  The size of bunk board or bunk roller you will need for your boat trailer is based off the hull size. However, generally speaking the manufacturer knows what size roller/bunk works best for the boat/trailer. Therefore I recommend using the same size that the trailer came with but it wouldn't hurt to go a bit longer if you have room. If you are switching from rollers to carpeted bunk boards then I would go longer. For the carpeted bunk board option we have part # CE27800 which are 36" long,...
  view full answer...
  
• Recommended Roller Bunks For LoadRite PWC Trailer
  The CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 will work well for your LoadRite trailer. If you want the 4 foot option, you can use # CE27700. This will work with the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4 # CE10003G-4. These brackets will follow the contours of your boat. For installing the brackets, I recommend the CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x...
  view full answer...
  
• Dutton-Lainson Boat Trailer Standard Roller Bunks for Hauling Heavy Loads of Seaweed
  Thanks for the great picture! Sorry to hear you're having problem with the 1,500 lbs CE Smith Roller Bunks Item # CE27710. It sounds like they are overload so let's get you upgraded to the Dutton-Lainson Boat Trailer Standard Roller Bunks item # DL21755. These roller bunks are 5' Long but have a 3,000 lbs capacity per pair so you'll need 4 sets to make sure these are not overloaded as well. The zinc-plated steel rollers are constructed of 12-gauge, galvanized steel.
  view full answer...
  
• Can the CE Smith Roller Bunks for Boat Trailers Be Used With Aluminum Boats
  The CE Smith Roller Bunks for Boat Trailers like part # CE27710 can be used on aluminum boats yes but the rigidity of the boat's hull will be the determining factor for whether or not damage can occur. If you have doubts of its rigidity then your best course of action would be to reach out to the boat trailer manufacturer to see if the hull is suitable for use with bunk rollers. I have attached a list of all our boat roller options for you as well.
  view full answer...
• How To Determine the Correct CE Smith Roller Bunks for a Boat Trailer
  The CE Smith Roller Bunks for Boat Trailers part # CE27710 are 5' long so as long as these are close to the same length of the bunk boards you have on your trailer now they will work well for you. The CE Smith Roller Bunks for Boat Trailers are is offered in a 4' long version, part # CE27700. I cannot confirm fit based on the make or model of the boat/trailer unfortunately, only the length of the existing bunks.
  view full answer...
• Best 5 Foot Roller Bunks for a Jet Ski Trailer
  Yes, we do have a set of 5 foot roller bunks. They are the CE Smith Roller Bunks for Boat Trailers item # CE27710. These bunks have six rollers each, are 5' long, and have a 1,500 lbs capacity. These roller bunks come in pairs and will be perfect for your jet ski. You will also need the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks item # CE10003G-4 to attach the roller bunks to your jet ski trailer.
  view full answer...
• Comparing Dutton-Lainson and CE Smith Roller Bunks
  There isn't a whole lot of difference between Dutton-Lainson roller bunks # DL21741 and CE Smith roller bunks # CE27710. Both have 5 foot long sections. Each section is rated for 1500 pounds. There are 6 rollers per section on both. Both are made with galvanized steel and heavy duty black rubber rollers. The main difference besides price is the shape of the rollers is not exactly the same. Either set can be mounted on a bunk or independently. To mount independently you would need the...
  view full answer...
• Recommended Roller Bunks to Replace 7 Foot Bunks on Boat Trailer
  I spoke with my contact at CE Smith and she stated that 5 foot roller bunks will be adequate for your 15-1/2 foot Smokercraft Alaskan, as long as the space between the cross members are 56 inches or less. If the space is more than that, the 5 foot long bunks will not be enough and you can then obtain two sets of 4 foot bunks and have them cut to size. For a 5 foot long roller bunk, I recommend the CE Smith Roller Bunks for Boat Trailers # CE27710. This is a channel-style roller bunk that...
  view full answer...
• How Far Should Rollers Install Behind Rear of Trailer Frame
  I would place the roller bunks in the same orientation as the wood bunks that were there previous. There would be no need to extend them out further. Normally the bunks extend just a bit past the rear of the trailer frame like the picture I attached.
  view full answer...
  
• Can I Use Roller Bunks and Carpeted Bunk Boards Together on Boat Trailer
  I'll start off by saying that I've seen quite a few boat trailers that use a combination of rollers like the CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 and a carpeted bunk like the CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair # CE27845. The rollers definitely help if you're on a lot of shallow or steep boat ramps and combining the two gives you the best of both worlds, with the rollers on the bottom and boards...
  view full answer...
• Can Carpet Bunks of 19’ V-Hull be Replaced with Roller Bunks
  Yes roller bunks like the # CE27710 can be used on a V-hull boat trailer like you have. This is a very common swap done on boat trailers.
  view full answer...
• Will Roller Bunks Work on Jet Ski Trailer
  The CE Smith Roller Bunks - 5' Long # CE27710 will absolutely work for your jet ski trailer and they will contour to your jet skis in the exact same manner as the bunk boards you have now do. The roller bunks should match the length of your existing bunk boards and there is the aforementioned 5' long boards as well as the CE Smith Roller Bunks for Boat Trailers - 4' Long # CE27700. You can mount them onto your existing bunks like you mentioned and their 1,500 lb capacity will be plenty...
  view full answer...
• Recommendation on Replacement Boat Trailer Bunks with Roller-Bunks
  Yes, can replace your current wooden bunks with a set of roller-bunks, like the CE Smith Roller Bunks # CE27710. Upgrading to roller-bunks will improve the loading and unloading of your boat. The roller are made of a heavy-duty rubber that will not only absorb the shock when loading and unloading your boat, but the rubber roller will protect the hull of your boat from scratches. CE Smith roller-bunks measure 5 feet long and will have 6 rollers installed on each bunk. The bunks have a...
  view full answer...
• How To Install The CE Smith Roller Bunks for Boat Trailers # CE27710
  If you have adjustable brackets for the bunk boards then you could lower them down and mount the CE Smith Roller Bunks for Boat Trailers # CE27710 directly to them. If you don't have adjustable brackets then you would need to remove the bunk boards and install new brackets like the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4. These brackets can be attached to the frame of the trailer with U-bolts like the CE Smith U-Bolts # CE15283GA-4. You'll want to measure...
  view full answer...
  
• How To Convert a Boat Trailer from Center Rollers to Bunk Rollers
  Yes, it is possible to switch from center rollers to bunk rollers on a boat trailer. For this, you will first need to remove the center rollers and then you can install a set of bunk rollers, part # CE27710 along with part # CE10000G-4 to support the hull. Then, in order to support both the port and starboard sides you can use part # CE27600. I have attached a photo of a similar setup with bunk boards instead of bunk rollers for the hull. In addition to the above you will also need to...
  view full answer...
  
• How To Determine Correct Bunk Boards and Mounting Hardware For 17' V Bottom Boat
  We have exactly what you are looking for. It is recommended to have bunk boards at least 50% of the length of your boat, so since your boat measures 17' long you would want to go with bunk boards that are at least 8-1/2' long. This is the minimum recommendation so you can absolutely use longer bunk boars if desired, you just want them to run from the stern as far forward as you desire. Based on how the crossmembers are on your trailer I would pickup some 10' long 2" x 4" boards and wrap...
  view full answer...
  
• Can Roller Bunks Be Used On Pontoon Boat Trailer?
  You can definetly use roller bunks to replace the standard wooden bunks on the trailer for your 16' pontoon boat, but you would not want to use 6" rollers mounted on 3 different brackets, as they will not be adequate for supporting the weight of your boat. With that said the easiest way to install roller bunks like the Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson # DL21754 you were looking at would be to keep the wooden bunks and mount the roller...
  view full answer...
• Roller Bunks For Shorelander Boat Trailer And Lund Fury 1600 Aluminum Boat
  You have a couple of options for rollers on your Shorelander trailer. If you want to completely cover the 7 foot bunks you currently have, you can attach a 4 ft roller like part # CE27700, and cut another to cover the 7 ft board. If you do mount the roller bunks to the boards you currently have you will want to make sure your rollers for the bow are adjusted at the proper height to offer support for the boat when loaded. I have attached a link to our boat trailer parts. Another option...
  view full answer...

Do you have a question about this Boat Trailer Part?